EP-BRD02

BLUETOOTH MILLIMETER WAVE RADARSENSOR VEHICLE RADAR DETECTOR

• LED indicators
  There are two LED indicators on the surface of the front of radar. The red LED is the power state lamp which will stay on when the power supply is turned on.
  The green LED is the operating status lamp which will be automatically trigger on when objects detected in the access area and it goes off when there is no objects.
• Detection Zone configuration
  The default detection Zone of the radar is 3 meters forward times 0.5 meters on the left and right sides.
  Different detection areas can be configured via mobile APP or debugging software running on uphost computer.
• Configuration parameters saving and reload
  Configuration such as detection area could be automatically saved, and the latest configuration parameters after power failure and restart will be reloaded.
• Firmware upgrade
  The firmware can be upgraded online through RS-485 or APP interface with host computer without taking off the cover board and the new firmware can take effect just by restarting the power of radar
• Stable performance
  Millimeter wave radar sensing capablity stay nearly the same under different light illuminations, climates such as rain, fog or snow and dust.